Scheduler

    This window where you can see and modify settings for scheduler you can access directly with Sched. button from main menu, or from Setup menu, in Scheduler tab.

    In here you can see the actual actions in scheduler ( ex: always dorecord FPM:30,start always,never stop,activated at 16:53:58 on 15.10.2002,on cams: 1,2,4, on motion detection and 1 min after, do save jpg image every 50 sec.,start always,never stop,activated at 16:53:58 on 15.10.2002,on cams: 1,2., etc.)

   You can delete actual settings or you can add new actions with -/+ buttons or by double click on a record. In the new apear window you can modiy the actions and afferent parameters:

• Type: the actions set by you can be perform always, daily, workday, weekly, montly. You can set start and stop time or the action start on motion detection, on video lost or always. If that action have a limited duration you can set it duration.
• Action:
  • record,
  • save image,
  • run program (you can specify in near edit box),
  • broadcast,
  • play sequance (an alternation sequence that you saved before),
  • set recording fpm - change recording rate for actual record (for this it must perform a recording before). For example, you want to record always, but during the night you set a smaller record rate and on motion detection a greater record rate (with set recording fpm).
  • set broadcasting fpm - change the broadcast rate,
  • change HSBC - load a file with hue, brightness, contrast, saturation settings, used only for a peroid of day you've specify.
• The selected action can be follow by an audio alert (you can set the sound and if it will be repeat or not) or message alert. Also, you can set that the image where action start to be display in full screen on in the biggest window (in ZSK).
• All settings you've made are display in bottom of window.

To save the settings check Enabled box from bottom of window.